Commercial RoofingPros and Cons of Roof Coatings

December 30, 2019by Scott Glaser
https://tpopros.com/wp-content/uploads/2020/05/70172089_163876881426319_4111549809851189280_n.jpg

Roof coatings might be the right decision for commercial properties, especially in a time when labor costs and environmental waste concerns are on the rise. A coating acts as a barrier to help protect the roof from the mother nature’s elements by increasing UV protection to fight against the sun’s harmful rays and helping to reduce the building’s energy consumption. Roof coatings also help to limit expansion and contraction cycles due to weather that can lead to premature failure of the underlying membrane in maintenance applications. The coating is also water-resistant, but some materials are better than others when it comes to preventing ponding water. A coating can be a good cost-effective option instead of a full roof replacement, but it’s important to do your research concerning the condition of the roof and its location, slope, and exposure to chemicals, heat, and UV rays.

Acrylic roof coatings

Acrylic is a water-based, cost-effective solution for a variety of roofs. It’s good for most climates and provides the best value.

Strengths: Acrylic coatings offer an excellent balance of cost and performance. They are highly reflective, UV resistant, and easy to work with.

Weaknesses: Acrylics will lose mil thickness with weathering, need to be applied at 50°F or above, and typically do not perform well in ponding-water situations.

Polyurethane roof coatings

Polyurethanes are more impact resistant and handle traffic the best of all coatings. There are two main types of polyurethane roof coatings: aromatic and aliphatic. Aromatic coatings are less expensive and not UV stable, so they are usually used as a base coating. Aliphatic coatings are more expensive, but are UV stable, hold color well, and stay cleaner than most other coatings.

Strengths: A urethane roof coating system with an aromatic base and an aliphatic topcoat is durable, stays cleaner, and is more resistant to ponding water than an acrylic coating. They also do well as cool roofs because they can be white and stay clean.

Weaknesses: They are more expensive than acrylics and can have a stronger odor compared to most other coatings.

Silicone roof coatings

Silicones are moisture cured and humidity can even promote their cure. In some applications, the use of silicone can eliminate the need for a primer.

Strengths: Silicones weather better than other coatings with almost no erosion and they don’t get hard or brittle. Silicone is also good in ponding water situations.

Weaknesses: Silicones hold dirt and rain acts as a cleaner; therefore the material loses reflectivity over time. It is also hard to adhere to silicone, so when a roof needs re-coating, you must either remove the coating completely or re-coat with a compatible silicone. Resistance to tearing is a mechanical weakness and silicone coatings should be used with fabric as a common practice.

There are many choices when it comes to coatings, but all are cost and energy efficient and can be a good solution instead of a full roof tear-off and replacement.

If you’re considering a Roof Coating for your Home or Commercial Roof in Houston Texas, give us a call us at:

(800) 674-3634 or visit our website at www.TpoPros.com

LET’S WORK TOGETHER

info@tpopros.com

WORKING HOURS
Monday - Saturday 9AM - 7PM
Sunday CLOSED
LOCATION
225 S Heights Blvd,
Houston, TX 77007
OFFICE
(800) 674-3634
EMAIL US
info@tpopros.com